Flyaside Panther Ball Bearing Sliding Door Gear

OPERATING ON THE CAGED BALL RUNNER PRINCIPLE

APPLICATION

Internal straight sliding door gear for houses, offices, schools etc. For sturdy reliable operation.

RANGE

• Maximum door weight 55kg (120lb).
• Maximum door height 2.4m (8ft).
• Maximum door width 1500mm (5ft).

DOOR CONSTRUCTION

Door thickness 30 to 44mm. Drawing shows how standard doors can be used to achieve an evenly balanced elevation from both sides. Standard sets cater for doors up to 1500mm wide - See schedule below.

FIXING

Top track side fixed. For soffit fixing use soffit fixing brackets. Single screw fixed guides on floor keep threshold clear. Not suitable for self-closing doors. Vertical and lateral adjustment. For cavities, use Straightaway 100 Gear (see page 20) or a Hideaway Pocket Door Kit. Use two sets for bi-parting doors.

PRINCIPLE

Linear motion provided by a sliding inner bar supported by a double row of chrome steel balls running between a vee section outer member.

OUTER TRACK

Galvanised steel drilled and c/sk for screws.

INNER TRACK

Aluminium.

BALL CAGE

Galvanised steel strip ball retainer. Chrome steel balls.

PENDANT BRACKETS

Steel, open slot for lateral adjustment & removal of door.

DOOR PLATES

Steel, zinc plated, steel pendant bolts giving vertical adjustment.

DOOR CHANNEL

Galvanised steel, drilled and c/sk for wood.

FLOOR GUIDE

Nylon, single screw fixing.

SIMULTANEOUS OPERATION OF 2 DOORS

Can be achieved by using Coburn Simultaneous Operator catalogue no. 62100.

STANDARD TRACKSETS

SET 1P	For doors up to 600mm wide
SET 2P	For doors 600 - 750mm wide
SET 3P	For doors 750 - 900mm wide
SET 4P	For doors 900 - 1050mm wide
SET 5P	For doors 1050 - 1200mm wide
SET 6P	For doors 1200 - 1350mm wide
SET 7P	For doors 1350 -1500mm wide