H80, H100 & H150

HINGED DOOR OPERATORS

Features:

• Microprocessor logic electronic control board
• Automatic limit switch (with encoder on H80& H150)
• Accident-prevention system with anti-crush device
• Articulated and sliding arm options
• Full range of accessories available

All COBURN Automatic Operators are available with either a sliding arm (S) or an articulated arm (A). In both cases the operator is fitted above the door. The sliding arm version is fitted where the door opens inwards towards the operator side of the door (pull) and the articulated arm version when the door is pushed away from the operator. The articulated arm should always be used where the recess is in excess of 100mm.

H80 HINGED DOOR OPERATOR

The H80 is intended for light service swing door operation for doors up to 80kg. Of truly innovative design it has many features including battery back up in the event of power failure, an easily accessible on/off switch and the ability to select Push and Go or Low Energy operating modes.

The Low Energy facility makes the H80 particularly suitable where disabled access is required and the Dip Switch Push and Go option is ideal when the use of detection devices is not recommended. A particular safety feature on the H80 ensures that if it meets an obstruction on its closing cycle it will immediately re-open before automatically closing slowly whilst searching for the obstruction. On the opening cycle the reverse occurs.

Offering magnificent value for money, the H80 is supplied in a sturdy black ABS case as standard. Other colours are available by negotiation subject to quantities required.

H100 HINGED DOOR OPERATOR

The H100 is for doors up to 100kg which are subjected to continuous use and is particularly suitable for use in hospitals or public buildings where disabled access is required. Its geared motor with its opening/closing speed adjustment is under constant control with an anti-crush feature for maximum safety. With motor-driven opening and spring-operated closing, the H100 can be used for fire doors and is ideal for installations requiring gentle and easy movement rather than great force.

H150 HINGED DOOR OPERATOR

The H150 offers a sophisticated version of the H100 and is suitable for doors in continuous use up to 150kg. Quick and easy to mount, the H150 can also be used on fire doors and its built-in brain incorporating an anti-crush feature as standard ensures maximum safety at all times.

The H100& H150 come in an elegantly designe adanodised aluminium case.

	H80	H100	H150
Dimensions (mm)	450x80x90	116x127x560	116x127x560
Maximum weight (with 1000mm wide leaf)	80kg	100kg	150kg (Heavy use) 250kg (Light use)
Operation	Light duty	Continuous duty	Continuous duty
Box/housing	Black ABS	Extruded aluminium with plastic side panels	Extruded with aluminium plastic side panels
Opening system	Motor	Motor	Motor
Closing system	Motor	Spring	Spring
Opening speed	1.5-3 seconds	3-5 seconds	3-5 seconds
Closing speed	Set to about 70% of full opening speed	4-8 seconds (adjustable)	Set to about 70% of full opening speed
Power supply	230v 50Hz	230v 50Hz	230v 50Hz
Power input	0.2A max.	1A max.	1A max.
Motor	12V	24V	24V
Emergency power supply	Built-in	Optional extra	Optional extra
Electric lock power supply	1.2A	1.2A	1.2A
Anti-crush device	Standard	Intrinsic safety thanks to very gentle contact during opening and closing	Standard
Limit-switch system	Standard	During opening	Standard
Adjustments	Automatic closing speed of movement	Automatic closing Opening speed Closing speed	Automatic closing Force adjustment Speed of movement
Power supply for accessories	24V=/0.15A	max 24V=/0.5A	max 24V=/0.5A max
Controls	Automatic closing, opening, closing safety reverse, stop, reset	Opening	Automatic closing, opening, closing safety reverse, stop, reset
Push & Go Dip	switch selection	Dip switch selection	Dip switch selection
Low energy	Dip switch selection	Yes	No

H100 Articulated arm (push)

H100 Sliding arm (pull)